Absolutely restaurant-worthy, this is a dish designed for a special occasion and a chance to really flex your barbecue prowess.
There are two heroes at play. First, the reverse-seared beef fillet, gently roasted with garlic and rosemary, then rested with butter before being finished over high heat for a beautiful sear. It takes inspiration from the classic restaurant technique of pan-searing steak in foaming butter and herbs, but with the added depth and delicious smokiness of the barbecue.
The second hero is the seared tuna tonnato, a creamy, salty, umami-rich sauce that brings beautiful contrast to the rich, buttery beef. To finish, roasted red shallots deliver a sweet, tangy hit, adding another layer of flavour and texture to this seriously impressive dish.
Instructions
-
Parsley Oil
Blanch: Bring a small saucepan of water to the boil on a side burner or stovetop. Prepare a bowl of iced water. Add the parsley leaves to the boiling water and blanch for 10–15 seconds, or until vibrant green. Remove with a slotted spoon and immediately plunge them into the iced water to stop the cooking process. (See Tip 1.)
Blitz: Once cooled, drain the parsley and squeeze out any excess water. Pat thoroughly dry with paper towel or a clean tea towel. Add the parsley and grapeseed oil to a blender and blitz until smooth.
Strain: Line a fine-mesh sieve with cheesecloth or a clean Chux cloth and place over a bowl. Pour the oil through the lined sieve and allow it to strain until you’re left with a vibrant green, silky oil. Transfer to a squeeze bottle, if desired, and refrigerate for up to 4–5 days. - Make the Tonnato: See Weber recipe here.
- Prepare the barbecue for cooking using indirect medium heat (190°C-230°C) and preheat as directed. See below for information on premium gas barbecue setup methods.
- Prepare the barbecue for cooking using indirect medium heat (190°C-230°C). Set up your barbecue with a convection tray and a roasting trivet and preheat as directed. See below for information on Weber Q settings and setup methods.
- Prepare the charcoal barbecue for cooking using indirect medium heat (190°C-230°C). See below for information on how to set up a Weber Kettle.
- Prepare your barbecue for cooking using indirect medium heat (190°C-230°C). See below for information on pellet barbecue settings and setup methods.
- View Grill Skill for setting up your Premium Gas Barbecue for Indirect Cooking
- View Grill Skill for setting up your Weber Q for Indirect Cooking
- View Grill Skill for setting up your 57cm Kettle for Indirect Cooking
- View Grill Skill for setting up your Pellet Barbecue for Indirect Cooking
- Prep Red Shallots: Peel the shallots and slice them in half lengthwise. Add them to a small barbecue-safe casserole dish or small disposable drip pan along with the remaining shallot ingredients. Stir to coat the shallots evenly.
- Once the barbecue has preheated, brush the cooking grills clean with a heatproof grill brush. Adjust your barbecue to the settings for indirect medium heat. Place the tray of shallots onto the barbecue. Roast the shallots, with the lid closed, for 60 minutes, or until the shallots have caramelised and softened, and the liquid has reduced to a syrup-like consistency. Meanwhile, prepare the beef.
- Once the barbecue has preheated, adjust it to the settings for indirect medium heat. Place the tray of shallots onto the trivet. Roast the shallots, with the lid closed, for 60 minutes, or until the shallots have caramelised and softened, and the liquid has reduced to a syrup-like consistency. Meanwhile, prepare the beef.
- Once the barbecue has preheated, brush the cooking grills clean with a heatproof grill brush. Place the tray of shallots in the centre of the cooking grill, between the two charcoal baskets. Roast the shallots over indirect medium heat, with the lid closed, for 60 minutes, or until the shallots have caramelised and softened, and the liquid has reduced to a syrup-like consistency. Meanwhile, prepare the beef.
- Once your barbecue has preheated to the set temperature, brush the cooking grills clean with a heatproof grill brush. Roast the tray of shallots over indirect medium heat, with the lid closed, for 60 minutes, or until the shallots have caramelised and softened, and the liquid has reduced to a syrup-like consistency. Meanwhile, prepare the beef.
- Beef Fillet Prep: If the beef has not already been trussed, using butcher’s twine to tie the beef fillet into a compact, cylindrical shape. Place the beef on a prep tray or plate. Gently smash the garlic cloves to crack them open, leaving the skins intact, then nestle the rosemary alongside the beef. Drizzle everything with olive oil, then season the beef with salt and pepper.
- Roast the Fillet: Place the beef fillet onto the barbecue in the indirect zone, next to the shallots. Balance the rosemary and garlic on top of the beef. Roast over indirect medium heat, with the lid closed, for 30-35 minutes, or until the internal temperature reaches 40-44°C (for a rare to medium-rare result, the temperature will continue to rise during resting and the final sear). Once the beef has reached temperature, remove it from the barbecue. Top with the butter, garlic, and rosemary, then leave to rest while you increase the temperature of the barbecue.
- High Heat: Ensure you have removed the tray of shallots and the beef from the barbecue, then increase the temperature of your barbecue for cooking using direct very high heat (290°C+) and preheat as directed. If your barbecue has a Sear Zone, use it for maximum heat. See below for information on premium gas setup methods.
- High Heat: Ensure you have removed the tray of shallots and the beef from the barbecue, then increase the temperature of your barbecue for cooking using direct very high heat (290°C+) and preheat as directed. If your barbecue has a + burner, use it for maximum heat. See below for information on Weber Q settings and setup methods.
- High Heat: Ensure you have removed the tray of shallots and the beef from the barbecue, then increase the temperature of your barbecue for cooking using direct very high heat (290°C+). See below for information on how to set up a Weber Kettle.
- High Heat: Ensure you have removed the tray of shallots and the beef from the barbecue, then increase the temperature of your barbecue for cooking using direct very high heat (290°C+). See below for information on pellet barbecue settings and setup methods.
- View Grill Skill for setting up your Premium Gas Barbecue for Direct Cooking
- View Grill Skill for setting up your Weber Q for Direct Cooking
- View Grill Skill for setting up your 57cm Kettle for Direct Cooking
- View Grill Skill for setting up your Pellet Barbecue for Direct Cooking
- Sear Fillet: Once the barbecue is searing hot, brush the cooking grills clean with a heatproof grill brush. Sear the beef fillet for a final 4 minutes, quarter-turning every minute, until the exterior is beautifully caramelised. Remove the fillet from the barbecue and place it onto a chopping board.
- Slice and Serve: Thinly slice the beef fillet. Arrange the slices on a serving plate and pour over any resting juices. Generously dollop the smoky tonnato randomly over the beef. Tease the layers of sweet shallots apart and arrange them on the plate, with the cups facing upwards. Pour the bright red shallot roasting liquid into the shallot cups. Drizzle over the parsley oil. Serve immediately.
Parsley Oil
Seared Tuna Tonnato
Roasted Red Shallots
Beef Fillet
Try Weber Connect
For Smart Barbecuing




























